Listed below are the of various Earthsafe Wastewater Treatment Systems manufactured by Eco Water (Qld) Pty Ltd. Use the following descriptions to select the system you require or contact us to discuss your requirements. All Earthsafe systems have been fully tested and accredited by the Queensland Government Authorities to treat up to 3 000 litres per day.

Earthsafe Polymer Twin Tank Models - Type 1

The Earthsafe D10 Polymer treatment system is built inside two injection moulded purpose built tanks. The sewage treatment system is light weight (360Kg) and can be easily  transported upon a ute or trailer to site where it can be lifted into the excavation by the machine that digs it (no crane needed). The total volume of treatment within the polymer systems is 6, 400 litres with an invert of 400mm standard. If a deeper invert is required a 350mm polymer riser can be supplied with the systems.

Earthsafe D10SF Secondary Standard

As Described above with a 9m Head Irrigation Pump suitable for above ground sprinklers.

Earthsafe D10SF H.H. Secondary High Head

AS above with a 30m Head Irrigation pump suitable for discharging to areas further than 30 metres or to a higher level, or for belowground pressure drippers.

Earthsafe D10 SF AS Advanced Secondary

This system is similar to the standard Earthsafe D10SF wastewater and sewage treatment system, however incorporates additional features to produce a higher standard of irrigation discharge. This is normally necessary in more environmentally sensitive areas (near waterways, wetlands or with sensitive shallow ground water etc) The higher discharge quality allows discharge within 10 metres of waterways and has lower environmental impact “Advanced secondary” quality irrigation is sometimes required by Councils in these circumstances.
This model D10 SF AS  is supplied with an internal filtration unit.

Earthsafe D10 SF AS / NR  Advanced secondary with nutrient reduction

Again this system is similar to the advanced secondary model, with the addition of an external filter pod and fitting kit. The fitting kit includes six (x6) 15kg bags of “Nutrilok” filter aggregate. This is a far superior filtration material than sand and also has the capability of also removing heavy metals etc.   This material removes a substantial amount of both Nitrogen (N) and phosphorous (P) from discharged clean water as well as some heavy metals. This model is particularly suited to environmentally sensitive areas (especially marine environment). The filter can be backwashed easily while being serviced and “Nutrilok” is available from the system manufacturer if needed.

Eartsafe D10 Wastwater Treatment System Polymer Documentation;

Earthsafe D10 Brochure
Owners Manual
Install Manual
CEA AS - Treatment Plant Approval 02/2019 - Earthsafe D10 S/F Advanced Secondary Quality Wastewater Treatment System 
CEA NR - Treatment Plant Approval 06/2019 - Earthsafe D10 S/F Advanced Secondary Quality Wastewater Treatment System with Nutrient Reduction 

Please call Us for Purchase Price